Nov 11, 2013 GPS is now communicating with MapSource! Checked Driver details, as you said; found that newer versions of the two Garmin USB drivers (grmngen.sys, and grmnusb.sys, both dated 4/18/2012) were. This download area offers free firmware upgrades for select Garmin® units. These upgrades are specific to the specific GPS units and software versions listed. This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it. Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products.
Long story short -
My Garmin GPS MAP 60CS will not communicate with Garmin MapSource City Select V7.0 on my system. The system is Windows 7 Ultimate SP1 X64.
I have tried all USB ports with the same result. Either nothing happens when I first plug in and turn on the GPS device, or, if the 60CS has never been plugged into the particular USB port, I get the popup 'Device driver software was not successfully installed'
Whether or not I get this message, when I attempt to transfer data to/from the GPS device from MapSource, it is not automatically detected, and when I click the Find Device button, I get a popup with the message: No devices found...
All other USB devices are functioning in all USB ports, so I know there is not a hardware problem.
This GPS device was working properly at one time, and it works properly on another computer, which is running Windows XP SP3, so I know that the GPS is not defective.
I attempted a system restore, thinking that the recent install of another USB device caused the problem, but this had no effect.
I tried booting into another install of the same OS (I have dual-boot on the system), but it did not work there either - same error messages.
Next, I re-installed Windows 7 Ultimate SP1 X64 in the 2nd boot of the dual-boot system, did not allow any Windows updates - and re-installed the Garmin MapSource City Select 7.0 software. Now the GPS device is able to transfer data to/from the PC.
I believe this is evidence that something - Windows update, or other software install updated the Windows native USB driver, and doing this it cannot recognize the old USB device (the GPS MAP 60CS).
Note that when installing MapSource software, I never allow the installation of the older Garmin USB drivers - I have read the warnings about this causing BSOD, and I have had this experience.
When the 60CS is working properly, it is with the native Windows USB driver, not the Garmin driver.
As for the still non-functional USB communication on the 'primary' Windows install, I may just leave it alone, and just switch to the 'second' boot when I want to use this device.
But I would really like to know what is going on here.
System specs:
MSI P67A mobo
Intel i5 2500 @ 3.4Ghz
8GB DDR3 SDRAM @ 1600Mhz
BFG NVidia GeForce 9800 GTX+ 512MB
Total of 1.5TB HDD capacity on SATA
Cooler Master 600W PSU
Thanks for your help.
FW
My Garmin GPS MAP 60CS will not communicate with Garmin MapSource City Select V7.0 on my system. The system is Windows 7 Ultimate SP1 X64.
I have tried all USB ports with the same result. Either nothing happens when I first plug in and turn on the GPS device, or, if the 60CS has never been plugged into the particular USB port, I get the popup 'Device driver software was not successfully installed'
Whether or not I get this message, when I attempt to transfer data to/from the GPS device from MapSource, it is not automatically detected, and when I click the Find Device button, I get a popup with the message: No devices found...
All other USB devices are functioning in all USB ports, so I know there is not a hardware problem.
This GPS device was working properly at one time, and it works properly on another computer, which is running Windows XP SP3, so I know that the GPS is not defective.
I attempted a system restore, thinking that the recent install of another USB device caused the problem, but this had no effect.
I tried booting into another install of the same OS (I have dual-boot on the system), but it did not work there either - same error messages.
Next, I re-installed Windows 7 Ultimate SP1 X64 in the 2nd boot of the dual-boot system, did not allow any Windows updates - and re-installed the Garmin MapSource City Select 7.0 software. Now the GPS device is able to transfer data to/from the PC.
I believe this is evidence that something - Windows update, or other software install updated the Windows native USB driver, and doing this it cannot recognize the old USB device (the GPS MAP 60CS).
Note that when installing MapSource software, I never allow the installation of the older Garmin USB drivers - I have read the warnings about this causing BSOD, and I have had this experience.
When the 60CS is working properly, it is with the native Windows USB driver, not the Garmin driver.
As for the still non-functional USB communication on the 'primary' Windows install, I may just leave it alone, and just switch to the 'second' boot when I want to use this device.
But I would really like to know what is going on here.
System specs:
MSI P67A mobo
Intel i5 2500 @ 3.4Ghz
8GB DDR3 SDRAM @ 1600Mhz
BFG NVidia GeForce 9800 GTX+ 512MB
Total of 1.5TB HDD capacity on SATA
Cooler Master 600W PSU
Thanks for your help.
FW
![Garmin Mapsource Usb Drivers For Mac Garmin Mapsource Usb Drivers For Mac](/uploads/1/2/7/7/127752440/352569175.jpg)
Drivers: Subcategory. It took about 20-30 seconds for the StreetPilot icon to show up on my mac's desktop via the USB connection. Once that happened, the Garmin Web Updater located my GPS unit.
- A linux (2.6-) kernel driver to connect garmin gps receivers via the usb bus.
- garmin_gps-0.32.tar.gz
- Hermann Kneissel
- Freeware (Free)
- 15 Kb
- BSD; Linux
- GPSBabel reads, writes, and manipulates GPS waypoints in a variety of formats. Over 100 supported formats include GPX, Magellan and Garmin serial and USB protocols, Geocaching *.loc, GarminMapsource, and Magellan Mapsend. For Windows, Linux,. ...
- gpsbabel-arc-states.zip
- gpsbabel
- Freeware (Free)
- 1.05 Mb
- Windows; BSD; Mac; Linux
- cGPSmapper Shareware 0.87 is designed as a smart and useful program which allow to convert vector maps in file(s) of a format understandable by your Garmin GPS receiver and GarminMapSource software.With cGPSmapper you will be able to produce maps,. ...
- cGPSmapper Shareware
- Stanislaw Kozicki
- Trial ($25.03)
- 2.9 Mb
- Windows 95, Windows Me, Windows XP, Windows 2
- cGPSmapper is a command line program which allow to convert vector maps in file(s) of a format understandable by your Garmin GPS receiver and Garmin速 MapSource. cGPSmapper PRO with MARINE support is able to produce both - marine maps - which works. ...
- http://www.cgpsmapper.com/download2/ProSetup.exe
- Stanislaw Kozicki
- Commercial ($530.00)
- Windows 95, Windows NT, Windows 2000, Windows
- Gpi2Gps converts Waypoints from Garmin GPI file format (i.e. Garmin POI Loader) to KMZ or GPS compatible format (GPX) in a few steps.
- gpi2gps.exe
- David Aguirre Grazio
- Shareware ($)
- 911 Kb
- Win All
- Converts Waypoints, Routes and Tracks from Magellan MapSend files (WPT, TRK) to Google Earth (. MapSend2GPS converts Waypoints, Routes and Tracks from Magellan MapSend files (.WPT and .
- mapsend2gps.exe
- David Aguirre Grazio
- Shareware ($)
- 952 Kb
- Win All
- Did you ever want to print or publish the altitude profile of a tracklog recorded with a GPS receiver? As long as you are using Garmin software you probably were not too happy - at least I wasnt! Now there is a better way to generate an elevation. ...
- GPS Altitude Chart
- Michael Steger
- Freeware (Free)
- 2.7 Mb
- Windows XP, 2000, 98, Me, NT
- GPSMapEdit 1. Visual authoring of GPS-maps in various proprietary cartographic formatsThe GPSMapEdit software was designed for visual authoring of GPS-maps in various proprietary cartographic formats.Features:- Garmin MapSource,- Polish format (input files for cGPSmapper.
- mapedit1-1-73-2-setup.exe
- Konstantin Galichsky
- Shareware ($)
- 2.38 Mb
- Win All
- Communication with your Garmin GPS just got easier thanks to this Plugin - the free internet browser plugin that sends and retrieves data from Garmin GPS devices. The Garmin Communicator Plugin lets you connect your Garmin GPS with your favorite. ...
- CommunicatorPluginforMac_301.dmg
- Garmin
- Freeware (Free)
- 8.8 Mb
- Intel-based or PowerPC G4 or later Mac OS 10.4.11 or later
- Remora USB File Guard is designed to do file encryption and compression in your USB storage devices. With Remora USB File Guard, you can secure all your files and store them in USB disk anytime and anywhere. And it is totally free.
- remorausbguard_green.exe
- Essential Skill ConsultantsLimited
- Freeware (Free)
- 2.06 Mb
- Win98, WinME, Windows2000, WinXP, Windows2003
- Remora USB File Guard Pro is designed to encrypt/compress/auto backup in your USB storage devices. With Remora USB File Guard Pro, you can secure all your files and store them in USB disk anytime and anywhere. And it is portable.
- remorausbguardpro_green.exe
- Essential Skill ConsultantsLimited
- Shareware ($19.95)
- 2.32 Mb
- Win98, WinME, Windows2000, WinXP, Windows2003
- Remora USB Disk Guard Pro is a project based file encryption/compression tool, or a strong file encryption/compression switch which can startup from your USB storage devices.
- remorausbdiskguardpro_green.exe
- Essential Skill ConsultantsLimited
- Shareware ($29.95)
- 3.04 Mb
- Win98, WinME, Windows2000, WinXP, Windows2003
Related:Garmin Mapsource Usb - Garmin Mapsource - Garmin Mapsource Malaysia - Garmin Mapsource Lebanon - Garmin Mapsource Italia
Garmin Mapsource Usb Drivers For Mac Free
Install Garmin Mapsource Windows 10
Pages : 1 | 2 | 3>